Unique Sampling Valve - Single Seat

                                   
Concept

The Unique Sampling Valve is a single seat valve designed for

sterilization before and after each sample. Valve body and connecting

pieces are made of one piece of material to avoid cracks and welding

pores.

Working principle

Sterilising: when the valve is closed, the channel between the valve

ports is open for sterilisation. If using steam, a small pressure relief

valve (optional) on the outlet is recommended. Sampling: when the

valve is opened, the stem and the membrane seal are retracted,

allowing liquid to pass.

Standard design

The valve consists of three parts, a valve body, an actuator and a

membrane seal. The rubber membrane seal is placed on the stem of

the actuator and works as a stretchable plug. The valve bodies and

actuators are interchangeable. The single seat valve can be upgraded

to a double seat valve by replacing the handle or actuator with an

upgrade kit - see ordering leaflet for accessories.

TECHNICAL DATA

Temperature

Temperature range: . . . . . . . . . . . . 1°C - 130°C

Max. sterilisation temperature,

dry steam (2 bar) . . . . . . . . . . . . . . 121°C

Steam must be dry, since condensate will damage the membrane

seal. It is recommended that the membrane seal be changed every

100 samples/sterilisations or in accordance with working conditions

or experience.

Pressure

Max. working pressure: . . . . . . . . . 600 kPa (6 bar)

Min. working pressure: . . . . . . . . . . 0 kPa (0 bar)

PHYSICAL DATA

Materials

Valve body: . . . . . . . . . . . . .1.4404 (316L)

Actuator: . . . . . . . . . . . . . . . 301, 303, 316L, PA 6.6/black, PTFE

Membrane seal: . . . . . . . . . .EPDM,

silicone

Options

A. Horizontal tube saddle valve body

B. Vertical tube saddle valve body

C. Varivent valve body

D. Weld, Tri-Clamp, Quick or thread connections

E. For accessories, please see ordering leaflet

Note!

For further information, see also instruction ESE01605.